N.B. Not to be confused with nuclear fusion.
As some of you know, I have a deep dislike of nuclear fission – due to the increasingly high costs and very slow construction times (see e.g. the UK's
Hinkley Point C). I strongly believe that renewables + batteries/storage are a better option, as they're improving exponentially.
However, I'm slightly more welcoming of Small Modular Reactors (SMRs), which could emerge in the next 5-10 years and have the potential to be cheaper as well as quicker to build, and safer too. I think larger-scale nuclear plants will be obsolete in the next decade or two, but I'm willing to hear counter arguments against that.
Let's start this thread with some news from the US...
-----
US regulators will certify first small nuclear reactor design
John Timmer - 7/29/2022, 11:20 PM
On Friday, the Nuclear Regulatory Commission (NRC) announced that it would be issuing a certification to a new nuclear reactor design, making it just the seventh that has been approved for use in the US. But in some ways, it's a first: the design, from a company called NuScale, is a small modular reactor that can be constructed at a central facility and then moved to the site where it will be operated.
The move was expected after the design received an okay during its final safety evaluation in 2020.
Small modular reactors have been promoted as avoiding many of the problems that have made large nuclear plants exceedingly expensive to build. They're small enough that they can be assembled on a factory floor and then shipped to the site where they will operate, eliminating many of the challenges of custom, on-site construction. In addition, they're structured in a way to allow passive safety, where no operator actions are necessary to shut the reactor down if problems occur.
Many of the small modular designs involve different technology from traditional reactors, such as the use of molten uranium salts as the reactor fuel. NuScale has a much more traditional design, with fuel and control rods and energy transported through boiling water. Its operator-free safety features include setting the entire reactor in a large pool of water, control rods that are inserted into the reactor by gravity in the case of a power cut, and convection-driven cooling from an external water source.
NuScale started the certification process in 2016. According to the NRC, that process required the company to submit technical information that allows the Commission to evaluate it as follows:
https://arstechnica.com/science/2022/07 ... or-design/

Credit: NuScale